Description
- * Very suitable for chimney accessories. The chimney fan generates a suction and causes quick smoke dissipation to prevent the smoke from escaping smoothly from the flue due to the bad chimney.
- * 80 W chimney fan for chimney diameter 13.5-21 cm, 100 W and 120 W chimney fan for chimney diameter 19-25.5 cm.
- * The chimney fan is suitable for use where the exhaust gas temperatures do not exceed 575 F for intermittent operation and 482 F for continuous operation. Otherwise, the extraction fan will burn.
- * Note - The operating voltage of the product is 220 V (110 V-120 V voltage, we are equipped with a voltage converter) and the chimney pull fan is used by leaving two ends of the cable for connection to the power source.
- * Easy to install, very quiet, suitable for most chimney types and does not require professional technicians for installation. The smoke is not only released quickly, but also has excellent performance.
Solve smoke problems.
Electric draught fan helps extraction fireplaces, pizza ovens, wood stoves.
These fans have been specifically designed for applications where efficient operation, low energy consumption, variable speed and compact design are of the utmost importance.
These fans should be installed at the end point of a solid fuel chimney or chimney system and can be mounted on masonry or metal chimneys.
The chimney fan is designed for use at flue gas temperatures of no more than 575 F for intermittent operation and 482 F for continuous operation.
Specifications:
Product Name : Electric Pull Inducing Fan
Voltage: 190-240V
Box contents: 1 x suction fan
Installation method: very simple: install suction fan on the chimney outlet, lay cables in a suitable place in the room and connect to a single 220V power supply. (Please turn off the device when installing or removing to avoid electric shock.)
Note:
1. When installing or removing the power switch, turn off the power switch to avoid electric shock.
2. The interface to the smoke outlet must be attached with waterproof insulation tape.
3. The installation on the interface to the chimney must be fixed and the interface must be firmly integrated into the chimney to achieve the best effect.